Signal Tracking
- 352 Channels
-GPS: L1 C/A, L2C, L2P
-BeiDou: B1, B2
-GLONASS: L1 C/A, L1P, L2 C/A, L2P
-Galileo, QZSS
-SBAS: WAAS, EGNOS, MSAS,GAGAN
Performance Specifications
Post Accuracy:2.5 mm + 1 ppm Horizontal
Processing Accuracy:5 mm + 1 ppm Vertical
Single Baseline Accuracy:8 mm + 1 ppm Horizontal
RTK Accuracy:15 mm + 1 ppm Vertical
DGPS Accuracy:<0.4 m 3D RMS
SBAS Accuracy:1 m 3D RMS
Standalone Accuracy:1.5 m 3D RMS
Performance Specifications
Cold start: <50s
Hot start: <15s
Warm start: <30 s
RTK Initialization time: typically <10s
Signal reacquisition: <1.5s
Initialization reliability: typically>99.9%
Velocity accuracy: 0.03m/s
Acceleration: 4g
Overload: 15g
Time accuracy: 20ns
Physical
Size(L×W×H): 71mm×46mm×9mm
I/O interface: 24-pin dual rows male pin header
Weight: 26.6g
Antenna: 1 × MCX female, 50 Ω
Environmental
Working temperature: -40 °C to + 80 °C
Storage temperature: -55°C to + 95 °C
Humidity: 95% no condensation
Electrical
Input voltage: +3.3V ~ +5.5VDC
Power consumption: 1.68W
Memory: 8 GB
Communications
3 LV-TTL ports, baud rates up to 921,600 bps
1 USB port
1 LAN Ethernet port
1 CAN Bus Reserved
1 Pulse Per Second (PPS) output
2 Event Marker input
3 LEDs indicating working status
Data Format
Correction data I/O: RTCM 2.X, 3.X, CMR(GPS only),CMR+(GPS only)
Position data output:
-ASCII: NMEA-0183 GSV, RMC, HDT, VHD, GGA, GSA,ZDA, PTNL,PJK; PTNL,GGK; PTNL,AVR; NAVPOS
-SunNav Binary update to 50 Hz
-BINEX Data: 0x00, 0x01-01, 0x01-02, 0x01-05,0x7d-00,0x7e-00, 0x7f-05
-Position data output rate: 1Hz, 2Hz, 5Hz, 10Hz, 20Hz, 50Hz
Software
SunNav Compass Receiver Utility software
Optional accessories
AT-series GNSS antenna
5 m/10 m RF Cables
OEM Board Evaluation Kit