Current Position：home>products

GPS500 GPS Antenna

Using multi feed point design to ensure the superposition of phase center and geometrical center which could minimize the influence of measurement error to lowest range.

Antenna unit gain is high, the direction of the beam width, to ensure that the low elevation signal to accept the effect, in some block more serious occasions can still receive satellite.

With anti-multipath choke plate, effectively reduce the impact of multi-path on the measurement accuracy.

With waterproof, anti-UV cover, for the antenna to provide long-term work in the field to provide protection.

Features
Specifications
Application

■ Using multi feed point design to ensure the superposition of phase center and geometrical center which could minimize the influence of measurement error to lowest range.
■ Antenna unit gain is high, the direction of the beam width, to ensure that the low elevation signal to accept the effect, in some block more serious occasions can still receive satellite.
■ With anti-multipath choke plate, effectively reduce the impact of multi-path on the measurement accuracy.
■ With waterproof, anti-UV cover, for the antenna to provide long-term work in the field to provide protection.

Antenna Specification

Frequency Range: GPS L1/L2, GLONASS L1/L2, Beidou B1/B2/B3
Impedance: 50 Ohm
Polarization: RHCP
Axial Ratio: ≤ 3 dB
Azimuth Coverage: 360°
Output VSWR: ≤ 2.0
Gain at Zenith: ≥ 5.5 dBi
Phase Center Error: ± 2 mm

Mechanical Specification

Dimension: φ152 x 62.2 mm
Connector: TNC Female

LNA Specification

LNA Gain: 40±2 dB
Noise Figure: ≤ 2.0 dB
Output VSWR: ≤ 2.0
Ripple: ± 2dB
Drain Voltage: 3.3--12 VDC
Current Consumption: ≤ 45 mA
Group Delay: ≤ 5 ns

Environmental Specification

Operating Temperature: -40°C to +85°C
Storage Temperature: -55°C to +85°C
Humidity: 95% Non-Condensing

GPS500 GPS Antenna

products

solutions

support

about us